** This <– vs –> DALY/Hi **
** COMPARISON TABLE **
GALLERY HERE
- Works with JK BMS having UART or GPS interface ( compatibility list here )
- Works with the listed JK having GPS connector Micro JST MX 1.25
- Works with JK-PB2 via RS485 – a special HW is needed –
- Works with every DALY and Hi BMS (DALY Clone) that has an UART/RS232 interface
- original DALY WiFi Module , works ONLY with BMS from July 2023 !
- Works with new DALY with smaller connector JST GH Series 1.25mm
- Works with former DALY with standard connector Micro Mini JST 2.0 PH
- Deploy it in 2 minutes !
- from rel 2.0.6 Dongle starts as Access Point – for easy config
- Simple AT serial command interface for first provisioning available as well
- REMOTE MQTT COLOR DISPLAY
- MQTT client ( TLS & JSON ) to export main battery pack parameters and alarms
- publish time can be set from 5 seconds to hours
- select which parameter you want to publish
- export auto-generated .json config file for IoTMqttPanel mobile app
- export multiple JSON-format or raw-format
- tested with
- https://www.hivemq.com/ (TLS)
- Mosquitto on Home Assistant ( TLS / uncrypted )
- MQTTHQ ( uncrypted )
- Perfect with Home Assistant
- tested with
- MODBUS TCP Server
- Perfect for Home Assistant MODBUS Users
- Perfect for Smartphone APPs like Virtuino ( see mqtt session )
- PUSHSAFER Client
- Send push Notification to your Mobile or PC, Telegram etc !
- Daily report sent at SunSet / SunRise / SOC 100%
- Push containing Alarms info
- Send push Notification to your Mobile or PC, Telegram etc !
- Works with or without Internet connection ( Acces Point or Station )
- Can be configured as Access Point to let your smartphone/computer to connect directly . Up to 4 Wifi stations can connect at the same time !
Perfect when you don’t have Internet connection – Like on Boat, Cottage … - almost All the feature sets are available on both AP and STA mode .
- Configured as WiFi Station it connects to your Access Point WiFi
- Can be configured as Access Point to let your smartphone/computer to connect directly . Up to 4 Wifi stations can connect at the same time !
- Monitor your batteries 24/7 with – 6++ months of daily storage onboard
- Auto setup depending on how many batteries are on the pack (up to 16)
- Each battery is monitored , graph ease the way to detect anything is wrong
- tired batteries
- battery under / over capacity specs
- balancer working bad ( MOS broken or bad wiring )
- Each and every anomaly on you battery pack you find in a second!
- SOC is monitored as well and syncronized with battery status
- CHARGE-DISCHARGE current [I] cycles shown daily
- DALY Smart Bluetooth LE dongle, can be connected too and works in parallel
- it works also with DALY WiFi new Module
- Passthrough can be enabled/disabled
- data PACKET SNIFFER between Bluetooth LE Dongle and DALY Smart BMS
- Possibility to inject command to DALY/Hi & JK Smart BMS via web page
- Remote TCP Virtual UART to use BmsMonitorVx.x.x sw via internet
- offer a TCP server for virtual com – manage advanced parameters using DALY SW wherever you are !
- Weather forecast and SunRise/SunSet based on your coordinates
- TimeZone detection based on your coordinates
- Upgradable platform for improvement – and I release many …..