connect to AP and configure as you whish.
+ Time Zone automatically detected through the geo Coordinates. No need to adjust TZ any longer in STA mode
+ Anomaly detection triggered on MQTT failures
@ Experimental : adding "/IoTMQTTPanel" to url it generates a JSON config file to be used with IoTMQTTPanel Android app
* Fix : MQTT dinamic memory allocation
2.0.5 released on 08 Mar 2024
+ multiple type of MQTT Json export added with webpage showing differt configurations
+ main MQTT Json TOPIC editable
+ FULLY Functional with JK-BMS UART (GPS) tested on JK-B2AxxS-15P : standing to JK protocol docs it works also with
JK-BD6AxxS-10P / JK-BD6AxxS-12P / JK-BD6AxxS-15P/ JK-B1AxxS-15P / JK-B2AxxS-15P/ JK-B2AxxS-20P
* Fix: JSON MQTT limit on parameter lenght
+ Added MQTT Connection-Test Button
+ Added fixes and patched to MQTT Library to make it more robust
* Fix: DALY->now working with odd battery number ( Thanks to Elio form SARDEGNA )
* Fix: View of Stored Battery files not working with odd number of batteries
2.0.4 released on 17 Feb 2024
+ WiFi output power on "Config" page
NOTE: if you notice missing PING to the dongle try to LOWER the output power - No reboot needed
2.0.3 released on 16 Feb 2024
* Fix wrong conversion on pack watts
+ web.all file cannot be accidentaly loaded from "upgrade page"
2.0.2 released on 15 Feb 2024
+ Added MQTT Json flag on MQTT config page
{
"bat": {
"0": 2947, battery 1 [mv]
.......
"15": 2949 last battery [mv]
},
"SOC": 27, Status of Charge %
"PWT": 42, Pack Watt
"PMV": "47.10", Pack Volts
"PMA": "0.90", Pack Amps
"PDV": 6, Delta mVolts between cells
"AMV": "2946.00" Average mVolts on cells
"TMP": 10, Pack temperature in C
"ALM": "0,0,0,0,0,0,0"; Alarms byte stream
}
NOTE: due to limited memory NOT all the parameters che be exported at teh same time
2.0.1
* Fixed Involontary DISCHARGE MOSFET OFF at startup
2.0.0 released on Feb 11 2024
* Fixed - weather forecast
* Fixed wrong file name "batt_"
+ New SW structure now supporting DALY-BMS and JK-BMS
+ BMS data polling and MQTT publish time now selectable from 5s to 300s
NOTE: Suggested settings are : BMS polling time 60s - MQTT Publish time 60s
NOTE: JK BMS needs only 0.35s for a full data request WHILE DALY needs about 0.9s ! don't stress this poor machine too much ;-)
+ Static IP settings on config page
+ Backup file are automatically removed
+ JSON MQTT *beta*
1.10.0 Internal release
+ 600% speed up web pages with 24h log
1.9.0 released on dec 29th 2023
+ Added possibility to Select Secure MQTT TLS or Insecure via WebPage . Not Secure tested with Mosquitto
NOTE !!! a reboot is needed everytime the TLS checkmark changes. May be fixed on next release
* Fix a problem on getting current battery package Watt
* Fix memory leackage during file upload
+ Virtual UART Tunnel for remote PCMaster - Inactivity timeout increased to 90s (was 60 )
+ possibility to Clock Sync from web page - needed in case of AP (stand alone) mode without internet connection
+ lightTime delta duration vs previous day :-)
+ when in AP mode - user can change default AP password "123456789" from "AT+PWD=" command or from web page
AP password will be the same used for Station mode.
+ AT+WMODE command automatically triggers a SAVE & REBOOT
1.8.0 released on dec 21th 2023
+ auto recovery of current graph in case of reboot or missing energy .
last availble "today" battery samples are taken and load in memory.
* fixed missing BMS get samples
1.7.0 release on dec 11th 2023
+ 6 months daily storage of Batteries + SOC- rolling -> old files are removed
+ list of "batt_" files on SETTINGS->FILE CONFIG page
+ download as .csv
+ show as html graph
+ auto export of each battery+SOC every 20minutes
+ Access Point mode for stand alone installation: SSID dalyBMSWiFi.com - PWD 123456789 def.IP : 192.168.0.1
+ AT+WMODE?
+ AT+WMODE=STA or AP ( + AT+SAR )
+ MQTT is disconnected between publish to avoid memory issues
1.7.0 KNOWN Issues/bugs
1- in AP mode there's no way to set the current time -> fixing ready on rel 1.8.0
2- MQTT Connection Status on SETTINGS->MQTT is refreshed after 1 minute from the set -> fixing on rel 1.8.0
1.6.0 release date nov 19th 2023
+ Virtual Console to remotely access to BMS via DalyBmsMonitorV1.1.5
+ Added Virtual Console enable button on MISC page. Default port : 6790
Virtual com used : https://www.hw-group.com/software/hw-vsp3-virtual-serial-port -> HW VSP3 Single v3.1.2
1.5.0 release date sept 29th 2023
+ Fixed Graph dates
+ html layout pages changed with top TAB selection
+ Graph length depends on configuration to save memory
+ Added console active on the first 15s to support out of the box config: 57600,8,N,1
| Command |
Description |
| AT+SCAN? |
Scan AP in the range |
| AT+SSID? |
GET AP's SSID |
| AT+SSID=myAPSSID |
SET AP SSID |
| AT+PWD? |
GET AP's passphrase |
| AT+PWD=myAPPasspherase |
SET AP passpharse |
| AT+STAT? |
GET WiFi Connection Status + IP and MAC |
| AT+SYSUSR=systemUser |
SET Protected Pages username default="admin" |
| AT+SYSPWD=systemPassword |
SET Protected Pages password default="admin!" |
| AT+SAR |
COMMAND : Save and Reboot |
| AT+FACTORY |
COMMAND : Restore to factory defaults |
| AT+CMD |
COMMAND : List all the available commands |
NOTE: each AT command MUST end with 0x0D 0x0A ( <CR><LF> )
+ MQTT configuration exported on config page
+ add FILE MANAGER webpage to download/upload the config.txt file
1.4.0 release date Aug 1st 2023
+ added watch-dog ping to default gateway, reset after failurs
1.0.0 release date July 3rd 2022